Chain and Sprocket kit for KTM DUKE 390 CC - KIT HXR 199
In stock

Chain and Sprocket kit for KTM DUKE 390 CC - KIT HXR 199

2937.00
  • Built for High power Motorcycles
  • Long lasting performance
  • Specially designed for Higher strength
  • Compatible with all terrains
  • * Buy 5 Qty, Get 5% discount.
    * Buy 10 Qty, Get 15% discount.
    • Suitable Motorcycle: Duke 390
    • Front Sprocket (Z) :15
    • Rear Sprocket (Z) :45
    • Number of Chain Links :112

    Front Sprocket


    S 02 560 - 15 Teeth
    Mounting:- 2 Tap on PCD + Involute Spline with Bonding

    Rear Sprocket


    S 02 499 - 45 Teeth
    Mounting:- 6 equispaced Holes on PCD + Bore

    Chain


    R520HXR-112-2

    Front Sprocket


    • Reliable with high performance & longer life.
    • Smooth operation & higher transmission accuracy.
    • Anti-resistant coating with Superior quality.
    • Anti-wear performance which lets vehicle move with full power.
    • Produced with Hi-Tech accurate machining which reduces noise and provides smoother riding.
    • The fitment of the product is as per OE specification.
    • Heat treated and hand finished to perfection.
    • Every sprocket goes through 18 production stages and 15 individual quality control checks before it is ready to leave the manufacturing facility.

    Rear Sprocket


    • Sprockets are manufactured from carbon steel material with duly induction hardened teeth.
    • Sprockets are only made using the best available materials.
    • Zinc coating to provide better rust prevention.
    • Induction hardening to improve wear resistance with outstanding performance.
    • Shot blasted sprockets with improved surface fatigue strength.
    • Sprockets are made of best surface protection treatment which enables to withstand dust and muddy ride with ease.
    • Sprockets are of made with best position accuracy to ensure better fitment capabilities.
    • Good surface finish that makes ride smoother.

    Pack Contents one Rear Sprocket,Front Sprocket,Chain

    • Lubricate the Chain using ROLON Chain Lube for every 500km in Seal ring chains and every 1000km for Standard Chains.
    • Clean the Chain using ROLON Chain Clean Spray. Every 2500 -3000 km's once chain should be cleaned and then re lubricated.
    • Use nylon brush or soft cloth before lubricating the Chain.
    • Avoid usage of Steel wire brushes to Clean Chain.
    • Don't use petrol,thinner and hot water for cleaning,and high pressure water jet direct contact to seal ring chain should be avoided.
    • Make sure your chain should be in adequate chain slackness - 1 inch min.
    • Dampers should be changed while chain sprocket replacement for better life of Chain Kit.
    • Wear Helmet for Safety - Follow Traffic Rules.